Gaggia K 111 Mode D'emploi page 28

Frothing milk
• Fill a cup or small jug half way with cold milk.
• Place the receptacle under the steam wand so as
to place the nozzle of the steam wand in the milk to
be heated. Turn the knob slowly anti-clockwise while
gently rotating the receptacle. Ensure that the steam
nozzle remains just below the milk surface at all times
during this step. (Fig. 16)
• When a sufficient amount of froth has been
dispensed, turn the knob clockwise.
Caution:
The steam wand is hot after use. Do not touch it with
bare hands but use a cloth.
Note:
Do not wait too long before cleaning the steam wand.
Milk deposits are hard to remove.
Once the froth has been made, we recommend placing
a cup with water under the steam wand and starting the
steam dispensing function again for a few - seconds.
This way, any residue of milk will be easily removed
from the nozzle.
Make sure the lateral hole of the steam wand is not
clogged (Fig. 17)

Fig. 16
Fig. 17