Télécharger Imprimer la page

livin flame Skomo Mode D'emploi Et D'installation page 55

Publicité

Les langues disponibles

Les langues disponibles

PARAMETER
Heat input
Nominal heat output
Reduced nominal heat output
CO concentration at nominal reference (13% O2)
CO concentration at reduced reference (13% O2)
Nominal effi ciency
Reduced effi ciency
Flue gas rate (min-max)
Draft advised (min-max)
Flue gas temperature (min-max)
Tank capacity
Recommended fuel
Heated surface
Diameter fl ue outlet tube
Diameter air intake
Nominal voltage
Nominal frequency
Ignition power consumption
Power consumption (min-max)
Stove weight
Energy class
Environmental decree n. 186 of 7/11/2017
N° Test Report
Powders at (13% O2) Ref. nominal heat input
It is recommended to control emissions after installation.
Pellet
The pellets are cylinders of compressed wood, produced from sawdust and wood processing (chips and
The pellets are cylinders of compressed wood, produced from sawdust and wood processing (chips and
sawdust), generally produced by sawmills and carpenters. The binding capacity of the lignin
contained in wood, allows to obtain a compact product without adding additives and
foreign chemicals to the wood, is therefore obtained a natural fuel with high yield.
The use of expired pellets or any other unsuitable material can damage parts
of the thermostove and impair proper operation: this can lead to the
termination of the guarantee, and its producer responsibility.
For our products use pellets diameter 6 mm, length 30 mm and
a maximum of 8% and A1 certifi ed according to the UNI EN
ISO 17225-2 standard. Keep the pellets away from heat sources
and not in humid environments or with explosive atmosphere.
IEE
MEASURE UNITS
kW
kW
kW
mg/m3
mg/m3
%
%
g/s
Pa
°C
Kg
(ø x H) mm
m3
mm
mm
V
Hz
W
W
Kg
mg/m3
MINI 5
4,9
4,4
2,1
178
488
89,63
92,32
4,2 - 2,7
3 - 10
85 - 142
11
pellet 6 x 30
130
80
50
230
50
315
43 - 75
45
A +
124
2003792
18
21

Publicité

loading