Télécharger Imprimer la page

livin flame Skomo Mode D'emploi Et D'installation page 35

Publicité

Les langues disponibles

Les langues disponibles

Dear Customer,
We thank you for having chosen one of our products, the fruit of technological experience and of
continual research for a superior quality product in terms of safety, dependability, and service.
In this manual you will find all the information and useful suggestions to use your product with the
maximum safety and efficiency.
We highly recommend to turn to our Authorized Service Centre for the installation and
the first ignition of the device as it not only carries out the installation perfectly but also
verifies the regular operation of it.
• Incorrect installation, incorrectly performed maintenance, improper use of the product release the
manufacturer from every eventual damage derived from the use of the stove.
• The unit cannot be used as an incinerator. Do not use fuels other than pellets.
• Never unplug the appliance when the stove is on. Make sure the stove has been switched off via the
control panel or the remote control and the fire is completely off before you remove the power plug
from the socket.
• In case of smoke development from the stove at the start of burning, never pull the power plug from
the socket.
• Before starting the stove again, always remove the remaining ash residue.
• This manual has been realized by the manufacturer and constitutes an integral part of the product
and must remain with it during its entire lifetime. If the product is sold or transferred, be sure that the
booklet is present since the information contained in it are addressed to the buyer, and to all those
persons of various titles who complete the installation, use and maintenance.
• Carefully read the instructions and the technical information contained in this manual, before
proceeding with the installation, use, and any operation on the product.
• The observance of the indications contained in the present manual guarantees the safety of people
and the product, the economy of use and a longer functioning lifetime.
• Although the carefully studied design and the risk analysis done by our company has permitted the
realization of a safe product, in any case, before effecting any operation on the stove, it is recommended
to keep said manual available and pay scrupulous attention to the instructions written therein.
• Be very careful when moving the ceramic details where present.
• Check the precise flatness of the pavement where the product will be installed
• The wall where the product will be placed must not be constructed in wood, or in any case, made of
an inflammable material, and in addition it is necessary to maintain a safety distance.
• While the stove is in operation, several parts of the stove (door, handle, sides) can reach high
temperatures. Therefore pay attention and use the proper precautions, above all in the presence of
children, elderly or disabled persons, and animals.
• Assembly must be performed by authorized persons (Authorized Assistance Center).
• Diagrams and drawings are furnished for the purpose of illustration; the manufacturer, with the intent
of pursuing a policy of constant development and renewal of the product can, without any notice,
make any modifications that are believed opportune.
• When the stove is working at its maximum speed, it is strongly suggested to wear gloves while
handling with the door for pellets loading and the door handle.
• It is prohibited to install in bedrooms or in explosive environments.
• Only use replacement parts recommended by the supplier.
Never cover the body of the stove in any way or obstruct the openings placed on
the upper side when the device is operating. All our stoves are trial lighted on the
construction line.
In the event of a fire, disconnect the power supply, use an extinguisher and call the fire fighters if necessary.
After that contact the Authorized Assistance Center.
This instruction booklet is an integral part of the product: make sure that it always accompanies the appliance,
even in case of transfer to another owner or in the case of transfer to another place. In the event of damage or
loss, request a copy from the area technician.
These symbols indicate specific messages in this booklet:
ATTENTION:
This warning sign indicates that the message to which it refers should be carefully read and
understood, because failure to comply with what these notices say can cause serious
damage to the stove and put the user's safety at risk.
INFORMATION:
This symbol is used to highlight information which is important for proper stove operation. Failure
to comply with these provision will compromise use of the stove and its operation will not be
satisfactory.
1

Publicité

loading