Publicité
Les langues disponibles
Les langues disponibles
Function TURBO
This function has been developed in the event you need to
heat your room quickly, for example when you have just
switched the stove on. When you choose this function,
the stove will work at its max. power for a period of thirty
minutes and the temperature will be automatically set at
30°C. After thirty minutes (or earlier if you give different
selections from the remote control), the stove will restart
working as it did before you activated the turbo function.
Keep the key TURBO (1) pressed for at least two seconds
to activate this function. You will read the word "TURBO"
(2) on the display of the remote control. Set temperature
and working power will disappear. Press SEND (3) to
transmit the selection to the pcb.
You will read the word "Turb" on the control board on the
upper part of the stove. This word will appear together
with the room temperature and working power set before
activating the function TURBO.
If you want to deactivate this function before thirty
minutes have passed, press the key TURBO (1) once again
for at least two seconds. The word TURBO on the display
of the remote control will disappear and you will see the
set temperature and power again. Press the key SEND (3)
to confi rm your selection.
Function ECONO
The function ECONO has been developed to save money
and it is used when you want to keep the temperature
constant in the room. This function lets the stove decrease
its working power every 10 minutes until it reaches the
power 1.
Keep the key ECONO (1) pressed for at least two seconds
to activate this function. You will read the word "ECONO"
(2) on the display of the remote control. Set temperature
and working power will disappear. Press SEND (3) to
transmit the selection to the pcb.
You will read the word "Econ" on the control board on
the upper part of the stove. This word will appear together
with the room temperature and working power set before
activating the function ECONO.
If you want to return to the standard function, press the
key ECONO (1) once again for at least two seconds. The
word ECONO on the display of the remote control will
disappear and you will see the set temperature and power
again. Press the key SEND (3) to confi rm your selection.
16
2
3
1
2
1
3
2
3
1
2
3
1
Publicité
