Publicité
Les langues disponibles
Les langues disponibles
Program 2 (ON2 and OFF2)
As above but with the keys ON2 and OFF2
Cancel any eventual already set timetables.
Please join the following procedure to cancel any other alre-
ady set timetables. This example refers to the automatic
switching off of the program 1 (Off1). The procedure is the
same for all plans.
Press the key corresponding to the switching on or off time
you want to cancel.
Referring to the example: press the key
You will see the hours and minutes and the symbol OFF1
blinking on the display of the remote control. Now press the
key "CANCEL" (2) to cancel the automatic switching on or
off timetables from the display.
Press the key SEND (3) to confi rm your selection and transmit
it to the pcb of the stove.
Daily repeat AUTO
Using the function AUTO, you can repeat the single
automatic switching on and off you selected every day.
You just need to press the key AUTO (1) for at least two
seconds to activate the function. You will read the words
AUTO (2) on the display of the remote control. Press SEND
(3) to confi rm your selection and transmit it to the pcb of
the stove. The LED chrono-thermostat will light up on the
control board indicating that the programming is on.
You can deactivate the automatic repeat whenever you
want just pressing the key AUTO again for at least two
seconds. The words AUTO will disappear from the display.
Press SEND (3) to confi rm your selection and transmit it to
the pcb of the stove.
Function SLEEP (not available on LCD2)
The mode SLEEP is another function developed to save
money. One hour after its activation, the system starts
decreasing the set temperature automatically by 1°C.
Press the key SLEEP (1) on the remote control to activate
the function SLEEP. You will see the symbol
display of the remote control. Press the key SEND (2) to
transmit your selection to the stove.
The control board will register the new setting showing
the word "SLEE" and the working power of the stove.
You can deactivate the function SLEEP whenever you want
just pressing the key SLEEP again and the key SEND to
confi rm your selection.
Please note: if the stove is working in "Auto", it is not
possible to activate the function sleep.
Always clean the brazier before starting an automatic switching on in order to
avoid any possible missed starts up which would damage your stove and the
environment.
18
(1).
3
1
2
2
3
1
on the
2
1
3
1
2
2
3
1
Publicité
