Publicité
Les langues disponibles
Les langues disponibles
Control board
Function keys
1. Temperature or power decrease
2. Temperature or power increase
3. Key On/Off
4. Receiver
5. Led alarm ALC
6. Led alarm ALF
7. Led chrono-thermostat
8. Led temperature ok
9. Led pellets loading
10. Led resistance
11. Display LED 7 segments
12. Led On/Off
1. Temperature or power decrease
Using the key on the menu Set temperature, you can
decrease the temperature from a maximum value of 40 °C
to a minimum value of 7 °C.
With the key on the menu Set power, you can decrease the
working power from a maximum value of 5 to a minimum
value of 1.
2. Temperature or power increase
ing the key on the menu Set temperature, you can increase
the temperature from a min. value of 7°C to a max. value
of 40°C.
With the key on the menu Set power, you can increase
the working power from a min. value of 1 to a max. value
of 5.
3. Key On/Off
Keep the key pressed for 2 seconds to switch the stove
on or off.
4. Receiver
Sensor receiving the settings of the remote control.
5. Led alarm ALC
The led blinks in the event of a malfunction or alarm.
6. Led alarm ALF
The led blinks in the event of a malfunction or alarm.
7. Led chrono-thermostat
This means the automatic single or daily programming of
the switching on or off of the stove is on.
The automatic programming can be set only with the
remote control (optional).
6
5
AL C
AL F
7
1
4
2
8
8. Led temperature ok
This is on when the stove reaches the set temperature.
In this case you will read the word "Eco" and the set
temperature on the display.
9. Led pellets loading
This led blinks every time the stove is loading pellets.
10. Led resistance
This led is on only while the stove is lighting up in order to
indicate that the resistance is warming the air which will
fire the pellets.
11. Display LED 7 segments
On the display you can read the different working functions
of the stove, the room temperature and the set working
power. In the event of a malfunction, the display shows
the relative error codes (see paragraph on alarm codes).
12. Led On/Off
This led indicates the different phases of the stove:
- it is on if the stove is switched on and working
- it is off if the stove is switched off
- it blinks if the stove is switching off
12
9
11
3
10
11
Publicité
