Publicité
Les langues disponibles
Les langues disponibles
SAFETY SIGNS AND INTERNATIONAL SYMBOLS
These Operating Instructions describe safety symbols and international symbols and pictographs that may be applied
to the device. Read the Operating Instructions to familiarise with all information concerning safety, assembly, operation,
maintenance and repair.
SYMBOLS
• READ THE OPERATING INSTRUCTIONS
If you do not adhere to the instructions and safety measures described in
the Operating Instructions severe injuries may occur. Read the Operating
Instructions before you start and operate this device.
• WEAR HEAD, EYE AND EAR PROTECTORS
WARNING: Hurled-away objects may lead to serious injuries of the eyes,
excessive noise may result in deafness. Wear eye and ear protection devices
when operating this device. Falling objects may cause serious injuries of the
head; wear a head protection when operating this device.
• KEEP OTHER PERSONS ON A DISTANCE
WARNING: Take care that no other persons are standing within a radius
of 15m around your working area. This particularly applies to children and
animals.
• WEAR FOOT PROTECTION AND GLOVES
Always wear safety boots and gloves when operating the device.
•
WARNING SYMBOL
Points to danger, warnings or reasons for particular carefulness. May be used
in connection with other symbols or pictographs.
• POSITION OF THE HANDLE
Direction of arrow shows how to install the handle. Always keep the right
position, you must never remain under the required distance !
• ATTENTION : HOT SURFACE
Never touch a hot exhaust pipe, gear box or cylinder. Otherwise, you may
suffer burns.These parts get extremely hot during operation and stay hot for
some time after the device has been switched off.
• DANGER OF INJURY !
Beware of hurled-away objects.
• DO NOT USE METAL BLADES
WARNING: Do not use metal blades with this device to avoid serious
injuries.
• MAXIMUM SPEED
The maximum speed of the cutting unit. The device must not be operated at
a speed higher than this.
GB-1
MEANING
ENGLISH
Publicité
