Dräger X-zone 5000 Notice D'utilisation page 44

Establishing a wireless connection
Display on main device:
Grouping LED:
red-green flashing slowly.
For all non-grouped X-zone 5000 within range of the main
device the grouping LED flashes green.
Display on the potential group device:
Grouping LED:
green flashing slowly.
7. For all required group devices, press the
succession to add the X-zone to the group.
Display on the group device:
Grouping LED:
lit in green.
44
1:55
1
03833112.eps
03933112.eps
or key in
OK
#1
X-zone 1
04033112.eps
8. Press the key on the main device to end the search
OK
process.
Grouping is completed.

Group monitoring is activated.

Display on main device:
Grouping LED:
lit in red-green.
9. Deactivate group monitoring provisionally (see chapter
4.2.7 on page 46).
10. Set up devices at the location of use.
#0 2
2
05133112.eps
Dräger X-zone 5000