Unpacking; Opening The Charging Column - Mennekes Basic 3,7 Instructions De Fonctionnement Et D'installation

Masquer les pouces Voir aussi pour Basic 3,7:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

5.2.4 Unpacking

T
T
WARNING
Risk of injury due to tipping over of the device
Even if slightly touched, an unsecured device can tip
over and squeeze people. In addition, the device can be
damaged.
f Only place the device on a level surface.
f Protect the device from tipping over.
f Mount the device quickly on a foundation.
T
T
ATTENTION
Damage to the charging column by improper handling
Collisions and impacts may damage the charging column.
f Move the charging column with utmost caution.
f Use a soft base to set aside the charging column.
Fig.: 11. Unpacking
The optional vacuum lifter facilitates handling of
the charging column.
Unpack the charging column:
f Loosen the strapping of cardboard packaging.
f Lift the cardboard packaging.
f Remove the key set 1 from the head-side hard foam
base.
f Remove the hard foam packaging.
f Remove the charging column.
f Place the charging column upright on the transport
pallet or on a soft surface.
12

5.2.5 Opening the Charging Column

T
Risk of injury due to tipping over of the device
Even if slightly touched, an unsecured device can tip
over and squeeze people. In addition, the device can be
damaged.
f Only place the device on a level surface.
f Protect the device from tipping over.
f Mount the device quickly on a foundation.
Fig.: 12. Opening the cover (example)
f Disconnect device from voltage.
f Open the lock 2 on the back of the charging column
f Fold the cover plate 1 upwards.
1
Fig.: 13. Releasing the turning lever
T
WARNING
with the double bit key.
2
1
1
2
3

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Basic 11Basic 22Basic s 22

Table des Matières