Safety Instructions - Dustcontrol DC 1800H Traduction Des Instructions De Service D'origine

Safety instructions

Read the following safety instructions Before operating the machine. Keep the User Guide. Failure to comply with the safety
instructions voids the warranty and may result in personal injury and damage to the machine. Dustcontrol is not responsible for
damage to the equipment caused by improper installation or improper operation of the equipment.
Warning
This machine is intended for professional use.
Only use accessories and replacement parts included in the Dustcontrol product line.
WARNING
Before use, you must receive training as well as information and instructions on how to handle the dust
extractor and the dust to be extracted.
WARNING
Use the machine for its intended purpose. Follow the instructions for the material to be extracted.
WARNING
When using electrical devices, basic safety instructions must be followed to reduce the risk of fire, electric
shock or personal injury.
WARNING
This machine is only intended for extraction of dry material.
WARNING
ASBESTOS: The container must be emptied before being transported from the site.
WARNING
If incorrect or non-OEM parts are used (especially filters, hoses and plastic bags), the machine can leak
hazardous dust which may result in personal injury.
WARNING
ASBESTOS: Maintenance must never take place inside the zone. The dust container should be emptied when
necessary and always after each use. The machine is only intended for extraction and removal of dust
deposits and must not be used as a dust collector.
WARNING
Training in the handling of the machine must take place at least once a year.
CAUTION
ASBESTOS: This machine is not suitable for connection to a machine that generates dust.
Environmental protection
Packaging materials can be recycled. Do not dispose of the packaging in household waste. Instead it should be returned for
recycling. Discarded units contain recyclable materials that should be recycled. Batteries, oil and similar items must not get into
the environment. Dispose of scrapped units in an appropriate recycling system.
DC 1800H/DC 2800H, Art.nr. 9497-H 13