Safety Considerations; Technical Data - Dustcontrol DC 2800c Manuel D'instruction

Safety Considerations

Read all instructions before attempting to operate
this machine and save these instructions.
Warning! When using electric machines, basic
safety precuations should always be followed to
reduce the risk of fire, electric shock and personal
injury, including the following:
1. Work area environment
Don´t expose the machine for rain. Don´t use it
in damp or wet locations or in presence of
flammable liquids or gases.
2. Overload
Never let the machine operate fully throttled.
Always follow the regulations pertinent to the
material you are working with ie asbestos.
Don´t use the machine for purposes that it isn´t
intended for.
3. Body injuries
Never let the suction come in contact with
parts of the body. The strong suction effect
can
hurt the blood-vessels in the skin. Don´t repair
the electric components yourself, get some-
body qualified. Faults may cause injury. See
also below under warnings.

TECHNICAL DATA

HxWxL
Weight
Inlet
Hose length
Collecting sack, 11 l
Flow, max
Neg. pressure, max
Power consumption
Fine filter polyester, area
Degree of separation
(DIN 24184/3)
Filter area, microfilter
Degree of separation,
microfilter (DOP)
Sound level
4. Don´t abuse cord
5. Important measure
6. Maintain the machine with care
7. Checking of damage
8. Warning
990x420x400 mm
14 kg
φ 50 mm
5 m
500x550 mm
3
190 m /h
21 kPa
1200 W, 220V/110V
1.5 m 2
99,9 %
2
0.85 m
> 99,97 %
< 70 dB(A)
DC 2800c, 9
Never pull the machine by cord. Keep cord
from heat and sharp edges. Check the electric
cable regularly if damage.
With cleaning and maintenance on the
machine, the power cable should be dis-
connected from the supply.
Keep machine clean and check that the hose is
entired and that all gaskets are tight. Follow
instructions. Keep handles dry and free from
oil and grease.
Before futher use of the machine it should be
carefully checked that the machine is unda-
maged. If there are any damaged parts these
should be repaired by of a Dustcontrol authori-
zed service center.
Use only accessories and replacable parts
which are available in Dustcontrol catalogue.
Vacuum
producer
kPa
capacity
20
15
10
5
0 50 100 150 200 m 3 /h
Art nr 9453