Safety Considerations; Technical Data - Dustcontrol DC 5800i 9.2 kW P Notice Originale

Safety Considerations

Read all instructions before attempting to operate this
machine and save these instructions.
Warning! When using electric machines, basic safety
precuations should always be
risk of fi re, electric shock and personal injury, including the
following:
1. Work area environment
Don´t expose the machine for rain. Don´t use it in
damp or wet locations or in presence of fl ammable
liquids or gases.
2. Overload
Never let the machine operate fully throttled. Always
follow the regulations pertinent to the
material you are working with ie asbestos. Don´t use
the machine for purposes that it isn´t
intended for.
3. Body injuries
Never let the suction come in contact with parts of
the body. Th e strong suction eff ect can
hurt the blood-vessels in the skin. Do not repair the
electric components yourself, get
somebody qualifi ed. Faults may cause injury. See also
below under warnings.
4. Don´t abuse cord
Never pull the machine by cord. Keep cord from
heat and sharp edges. Check the electric cable regu-
larly if damage.
5. Important measure

TECHNICAL DATA

HxWxL
Weight
Inlet
Collection in container
Hose length rek.max.
Flow, max
Neg. pressure, max
Power consumption
Fine fi lter polyester, area
Degree of separation
(DIN 24184/3)
Soundlevel */
*/ Sound level at 1.6 m height and 1 m distance according to DIN
45635 Section 1 (4/84) in free space and at maximum airfl ow.
6.
followed to reduce the
7.
8.
1810x790x1400 mm
240 kg
φ 108 mm
kPa
40
30 l
5-50 m
3
800 m /h
28 kPa
20
9.2 kW
8.4 m 2
> 99.9 %
< 70 dB(A)
DC 5800i 9.2 kW P - 8
With cleaning and maintenance on the machine, the
power cable should be disconnected from the supply.
Maintain the machine with care
Keep machine clean and check that the hose is enti-
red and that all gaskets are tight. Follow instructions.
Keep handles dry and free from oil and grease.
Checking of damage
Before futher use of the machine it should be ca-
refully checked that the machine is un damaged. If
there are any damaged parts these should be repaired
by of a Dustcontrol authorized service center.
Warning
Use only accessories and replacable parts which are
available in Dustcontrol catalogue.
When using faulty parts or pirate parts
(especially fi lter) the machine could leak out
unhealthy dust which can cause personal
injuries.
Capacity
DC 5800i 9,2 kW P
200 400 600 800 m 3 /h
1000
Part No 9446