Inserting Q In The Soft Tip; Removing Q From The Soft Tip - ExSilent Q Mode D'emploi

Inserting Q in the soft tip

• Hold the soft tip firmly with the pull
cord pointing upwards.
• Use your other hand to hold the
module: the battery should point
downwards, the small battery contact
being on the side of the pull cord. The
flat side of the module should also
point to the pull cord.
• Insert the module by turning it over
into the soft tip.
12
• Check the position of the module inside
the soft tip. If the position is not like the
one illustrated in the image: hold the
soft tip firmly and turn and/or push the
module into its correct position.
• Hold the module firmly and pull at
the pull cord only to make sure that
the module is placed sufficiently deep
inside the soft tip.
• If necessary, repeat the last two steps.

Removing Q from the soft tip

Keep the module firm and use your other
hand to pull the pull cord downwards.
13