Locking The Panel Heater On The Hanging Frame - Thermor Amadeus évolution Notice D'utilisation Et D'installation

LOCKING THE PANEL HEATER ONTO THE HANGING
Position the tilted panel heater on
1
brackets S1.
To unlock the panel heater from the hanging frame, take a flat-bladed screwdriver and
push the slider (located on the top left-hand corner of the hanging frame behind the
appliance) towards the wall.
Lift the panel heater while holding the slider in place with your screwdriv-
er. Tilt it forwards and then remove it from brackets S1.
FRAME
S1
Lower the panel heater onto the
3
hanging frame. A click tells you that
the panel heater is fastened and
locked in place.
Pivot the panel heater upwards and
2
lift it to position it on brackets S2.
CLIC
26
S2