Thermor Amadeus évolution Notice D'utilisation Et D'installation page 34

ACTIVATING THE ABSENCE DETECTION FUNCTION
The absence detection function
automatically, as soon as you leave it.
The programming instructions (
ACTIVATING THE AIRING+ ABSENCE DETECTION FUNCTION
DEACTIVATING THE ENERGY-SAVING FUNCTIONS
To optimise your setting:
- Activate the energy-saving functions (knob B),
- Adopt "19°C" as a standard (1° less = 7% savings in energy).
enables you to lower the temperature setting for your room
To activate the absence detection function:
Turn control knob B to position
B
If your panel heater detects no one in the
room, it automatically lowers the temperature
setting progressively to 3.5°C lower than the
Comfort temperature setting.
) take priority over absence detection.
To activate the airing + absence detec-
tion function:
Turn control knob B to position
B
The two functions described above are acti-
vated.
To deactivate the energy-saving func-
tions:
Turn control knob B to position
B
The energy-saving functions are deactivated.
32