Use; Heating Your Room: How To Use Comfort Mode - Thermor Amadeus évolution Notice D'utilisation Et D'installation

This mode enables you to have the ambient temperature you desire in your room. The consump-
tion indicator lights enable you to optimise your setting (see page 33).
Set the cursor A to position
1
The heating light E illuminates if the
room's temperature is below that indi-
cated on the control knob C.
A
E
Wait at least 6 hours for the room's tem-
3
perature to stabilise.
If the room's temperature is acceptable,
setting is complete.
HEATING YOUR ROOM:
HOW TO USE COMFORT MODE
PROG

Use

Set the temperature knob C to the
2
desired temperature. For a setting of
around 19°C, only the first light (green)
on the indicator D comes on to indicate
optimised consumption.
E
D
The heating light E illuminates if the room's
temperature is below that indicated on the
control knob C.
If the room's temperature is not accept-
4
able, progressively adjust the control
knob C using the notches (one notch at a
time).
The higher the temperature shown on the
control knob C the more the indicator light
D moves to the right.
28
D
C
C