Use; Control Unit; Switching The Appliance On For The First Time - Thermor SSC NF 3 Etoiles Oeil Notice D'utilisation

SWITCHING THE APPLIANCE ON FOR THE FIRST TIME

Press the button
Once activated, the current time, the operating mode, and temperature
are displayed on the screen.
In Standby mode, the current time, the day of the week, and the "Stb" message
are displayed.
Note:
The appliance beeps twice when switching to Standby mode.
When the appliance is activated, it beeps once.
Setting the day of the week and the time
-Enter Standby mode " " and press the button
-tEd (time End date) is displayed on the screen. Confirm with the button
.
-Press [+] or [-] to reach the correct day of
the week then confirm with the button
Monday; 2 = Tuesday; 3 = Wednesday ...).
-The time will begin to flash.
-Press the [+] or [-] buttons to set the hour then confirm with the
button .
-The minutes begin to flash. Press the [+] or [-] buttons to set the minutes
then confirm with the button
After the procedure is completed, return to Standby mode " ".

CONTROL UNIT

[Timer/Prog]
to switch on the appliance or put it in Standby mode.

Use

(1=
.
27
¾
for at least 3 seconds.
11: 16 2