Use; Heating Your Room: How To Use Comfort Mode - Thermor AMADEUS EVOLUTION Notice D'installation Et D'utilisation

This mode enables you to have the ambient temperature you desire in
your room. The consumption indicator lights enable you to optimise
your setting (see page 31).
Set the cursor to
position.
Set the temperature
knob to the desired
temperature.
Wait at least 6 hours for the room's temperature to
stabilise.
If the room's tempera-
ture is not acceptable,
progressively adjust
the control knob using
the notches (one notch
at a time).

Use

HEATING YOUR ROOM:
HOW TO USE COMFORT MODE
The heating light illu-
minates if the room's
temperature is below
that indicated on the
control knob
PROG
For a setting of around
19°C, only the first
light (green)
indicator comes on to
indicate
consumption.
The higher the tem-
perature shown on
the control knob the
more the indicator
light
right.
27
.
on the
optimised
moves to the
GB