To optimise your setting:
- Activate the energy-saving functions,
- Adopt "19°C" as a standard (1° less = 7% savings in energy).
All the panel heaters in the same room must be fitted with the same function capabilities.The
energy-saving functions must be set in the same way on each heater.
We do not recommend the use of the "airing"
and rooms located close to an entrance door from outside your home or from the garage.
Absence detection is made from a height of over 45cm (Diagram ) and operates progressively (Diagram
2):
5 m
12 cm
Diagram
The energy consumed by an electrical heating appliance depends, among other things, on the tempe-
rature required. The temperature recommended by the public authorities is 19°C, in Comfort mode
(15.5°C in Eco mode).
The "Consumption Indicator" function enables you to position yourself in accordance with this
recommended temperature.
Therefore, depending on the temperature required:
- If the second orange or red LED is lit, you can behave more responsibly by lowering your required
temperature significantly.
- If the first orange LED is lit, you can behave more responsibly by lowering your required tempera-
ture slightly.
- If the green LED is lit, you are at the recommended temperature and are already behaving respon-
sibly.
E.g.: Your appliance is set to 19°C, in Comfort mode (whether programmed or not)
At 9:00, it detects your absence.
At 9: 30, its operating instructions are set to18°C.
At 10:00, its operating instructions switch to 17°C.
At 10:30, its operating instructions switch to 15.5°C.
C
ONSUMPTION INDICATOR
and "airing + absence detection"
Diagram 2
30
functions in corridors