Automatically Lowering The Temperature Of Your Room: How To Use Eco Mode - Thermor AMADEUS EVOLUTION Notice D'installation Et D'utilisation

AUTOMATICALLY LOWERING THE TEMPERATURE IN YOUR
This involves a lowering of the temperature by around 3.5°C with
respect to the Comfort temperature
recommend that you use this mode when you will be absent for 2 to
24 hours, or during the night, especially in bedrooms.
Set the cursor A to position
The Comfort temperature will
be lowered by about 3.5°C.
If you have a programmer:
PROGRAMMING THE HEATING PERIOD:
Using the programming, you can adjust your device's settings to suit your lifestyle.
By connecting the pilot wire to a programmer, or if you use an on-board programmer (available as an
option), you can programme your Comfort
tions included with your programmer).
You can connect several appliances to one programmer.
The temperature set on the control knob
reference for the desired temperature according to the programming.
Order on your
programming box
COMFORT -1°C
COMFORT -2°C
ECO
FROST
STOP
ROOM: HOW TO USE ECO MODE
HOW TO USE PROG MODE
-1°C with respect to the setting on the knurled knob
-2°C with respect to the setting on the knurled knob
-3.5°C with respect to the setting on the knurled knob
Ambient temperature held at around 7°C.
Immediate switch off of the heating (used to disconnect the power).
, set on the control knob. We
PROG
and temperature periods (please refer to the instruc-
is the base temperature that will serve as a
Lower
28
This mode enables you to lower
the temperature automatically
without altering the Comfort
setting on the control knob.
PROG