Advanced Functions; Open Window Detection; Anticipated Heating; Presence Detection - Thermor SSC NF 3 Etoiles Oeil Notice D'utilisation

Masquer les pouces

Table des Matières

Les langues disponibles

Open window detection

With this function the appliance can detect if a window is open

and switch to Frost Protection mode (7° C). After the window is closed,

you will have to press the

to the previously selected temperature. This function is active by default.

Activate/Deactivate the Window Open detection function

Switch the appliance to standby by pressing the button .

Press the button

Press [+] until reaching Fun then confirm with the button

ON is displayed on the screen along with the Window icon; the function

will be activated.

The function can be deactivated by pressing [-]. OFF is displayed along

with the Window icon, confirm with the button

inactive.

"ASC" Anticipated heating

This function starts heating slightly before the scheduled time so that your

comfort level is increased while total power consumption is reduced.

This innovative function is particularly useful for arriving at the requested

temperature at the requested time. This function is active by default.

Activate/Deactivate the Anticipated Heating

-Switch the appliance to standby by pressing the button .

-Press the button

-Press [+] until reaching Fun then confirm with the button

-Pass the window open function by confirming with the button

-ON and ASC are displayed, confirm with the button

be active.

-The function can be deactivated by pressing [-]. OFF and ASC are

displayed on the screen, confirm with the button

be inactive.

Presence detection

Your appliance is equipped with a motion sensor that detects your

presence in the room. When this happens, it will heat in Comfort Mode.

-If you leave the room for more than 30 minutes, the temperature will be

lowered by 1° C.

-If you leave for more than 60 minutes, the temperature will be lowered by

2° C.

-This function is active by default.