The Beep Function; Locking The Control Unit - Thermor SSC NF 3 Etoiles Oeil Notice D'utilisation

Activate/Deactivate the Presence Detection function
-Switch the appliance to standby by pressing the button .
-Press the button
-Press [+] until reaching Fun then confirm with the button
-Pass the window open function, then the anticipated heating function, by
confirming with the button
-ON + "eye" are displayed, confirm with the button
detection mode will be activated.
-The presence detection function can deactivated by pressing [-]. OFF
+ "eye" are displayed on the screen, confirm with the button
function will be inactive.

The BEEP function

By default, one or two BEEPs are emitted each time
a button is pressed.
The sound remains active by default when the On/
Standby button is pressed.
Activate/Deactivate the BEEP function
-Switch the appliance to standby by pressing the button .
-Press the button
-Press [+] until reaching Fun then confirm with the button
-Pass the window open, anticipated heating, and presence detection
functions by confirming with the button
-bON is displayed, confirm with the button
each time the buttons are pressed.
-If you want to turn off the BEEP, press [-]. bOFF will be displayed on the
screen, confirm with the button

Locking the control unit

The control unit can be locked to avoid any accidental manipulation.
Lock and unlock the unit by pressing the button
padlock will appear or disappear.
This function can be accessed from any mode, including Standby.
¾
for a few seconds. tEd is displayed.
.
¾
for a few seconds. tEd is displayed.
19.0

.
, the BEEP will be activated
, the BEEP function will be inactive.

32
.
, the presence
On
b
.
for a few seconds, a
, the