Fixing The Hanging Frame To The Wall - Thermor Émotion 3 Notice D'utilisation

FIXING THE HANGING FRAME TO THE WALL

1
Place the hanging frame on the
floor against the wall.
Locate drilling points A .
Drilling
points A
Drilling points A show the position
for the lower fastenings.
3
Drill the 4 holes and insert the
wall plugs . Use suitable wall plugs
when fitting on a specific support
(e.g. plasterboard wall) .
2 Refit the hanging frame, lining
up with drilling points A to find
drilling points B (you can also use
a level) .
Drilling points B show the position
for the upper fastenings.
4
Position the hanging frame and
screw it down .
32
Drilling
points B
Drilling
points A