Declaration Of Conformity - Kemper 150 0004 Mode D'emploi

9.3 Declaration of Conformity

Within the meaning of Directive 2006/42/EC on Machinery
Manufacturer:
Mr. Manfred Könning is authorized to compile the technical documents.
We declare herewith that the machine specified below is in compliance with all applicable provisions
of the EC Machinery Directive 2006/42/EC.
Order No.
Designation:
This machine is also in accordance with the relevant provisions of the following EC Directives:
2006/42/ES
2004/108/ES
2006/95/ES
93/68/EHS
The following harmonized standards (or parts thereof) were applied:
EN ISO 12100 part 1+2, EN 294,
EN 349, EN418, EN 983
EN 1050
EN 60204 -1
EMVG
EN 610000-6 part 3
EN 610000-6 part 2
The following technical specifications (or parts of these standards) were employed:
VDE 0100
VDE 0113
UVV BGV A1
BGR 500 2.26
DIN 45635
Annex No. VIII to the Directive 2006/42/EC was observed. Compliance with the requirements under the
Directive on electrical equipment designed for use within certain voltage limits was ensured according to Annex
I, No. 1.5.1 of Directive 2006/42/EC.
Additional information:
Declaration of Conformity expires in the event of use contrary to the intended purpose or in the event of
implementation of structural changes that have not been confirmed by us as the manufacturer.
Vreden, 26.08.2013
KEMPER GmbH
Dipl.-Ing. M. Könning
(Head of Technical Department)
Order No.: 150 0004
Technical changes and errors reserved.
KEMPER Welding Fumes Stationary Filter
KEMPER GmbH
Von-Siemens-Str. 20
D-48691 Vreden
85 100 100 - 85 100 112, 85 100 117 - 85 100 118,
85 100 132 - 85 100 133, 85 200 100 - 85 200 105,
85 200 109 - 85 200 112, 85 200 122 - 85 200 123,
85 300 100 - 85 300 109, 85 300 118 - 85 300 119, 85,405
Welding Fumes Stationary Filter
Directive on Machinery
Electromagnetic Compatibility
Directive on Electrical Equipment Designed for Use Within Certain Voltage Limits
Directive on the Use of the CE Conformity Marking
Safety of Machinery
Safety of Machinery - Principles for Risk Assessment
Electrical Equipment of Machines
The Act on Electromagnetic Compatibility of Machinery
Basic Professional Standards for Emitted Interference
Basic Professional Standards for Interference Resistance
Establishment of Low Voltage Equipment
Electrical Equipment of Machines - Glossary to Standard EN 60204-1
Accident Prevention Regulation:
Welding, Cutting and Related Methods
Noise Measurement on Machinery
- 80 -
Instruction Manual - EN
Principles of Prevention
rev.:
Status as of: 04/2014
0