3 Product Description
The welding fumes filter is a compact device for filtration of welding fumes, using
which the welding fumes generated during welding, close to the place or origination,
are extracted and separated with an efficiency of more than 99 %. For this purpose
the device is equipped, depending on configuration, with a flexible extraction arm
whose extraction nozzle is flexible and keeps automatically shape in any set position.
The extracted air is cleaned in a two-stage filtration and brought back into the
workspace.
Picture 1, Product description
Pos. Designation
1
fan with motor
2
Exhaust silencer
3
Compression clamp
4
Service door
5
Filter set
6
Extraction arm
(according to configuration)
7
Extraction nozzle
Order No.: 150 0004
Technical changes and errors reserved.
KEMPER Welding Fumes Stationary Filter
Pos.
Designation
8
Green LED
(filter is operational)
9
Red LED
(filter exchange required)
10
Filtration unit wall holder
- 52 -
Instruction Manual - EN
rev.:
0
Status as of: 04/2014