Technical Data And Accessories; Rating Plate - Reiner jetStamp graphic 970 Mode D'emploi

jetStamp graphic 970

5. Technical Data and Accessories

5.1. Rating Plate

Observe the rating plate before the device is connected.
The rating plate is located on the bottom of the device.
The following information has the following meaning:
Mod. = Model
S/N = Serial Number
QC. = Quality Control
= jetStamp graphic 970 meets the requirements of EC directive 2004/108/EC.
The device bears the CE marking for this.
= jetStamp graphic 970 is in accordance with the following standards or
standardized documents
FCC 47 CFR Ch.1 Part 15 Bluetooth: FCC: R7TAMB2300.
= Safety of Information Technology Equipment
= jetStamp graphic 970 is produced according to the safety standards IEC/EN 60950-1.
Disposal
Directive 2006/66/EC:
Consumers are obliged to return flat batteries and rechargeable batteries to a
suitable collection site.
Batteries and rechargeable batteries can be returned free of charge to the intended
community collection points or the point of sale.
The adjacent symbol means:
Do not dispose of batteries or rechargeable batteries with conventional household
waste.
The following symbols may be located below the sign:
Cd = Contains more than 0.002 percent by weight cadmium
Hg = Contains more than 0.005 percent by weight mercury
Pb = Contains more than 0.004 percent by weight lead
Directive 2002/96/EC (WEEE)
Old devices must not be disposed of in the common household waste but in a
specified acceptance point for recycling of electrical and electronic devices.
GB
81