Install Pcset Graphic Software; System Requirements; Installing Software - Reiner jetStamp graphic 970 Mode D'emploi

jetStamp graphic 970

1.5. Install PCset graphic Software

1.5.1. System Requirements

Supported REINER devices:
- jetStamp graphic 970
- REINER 940
Hardware:
- PC with Pentium processor (also compatible) or higher
- Graphics adapter with a min. resolution of 800 × 600 pixels
(at least 256 colours; optimal: TrueColor, 24 Bit, 16.78 million colours)
- RAM, at least 32 MB
- 10 MB free hard disc memory
- 1 free USB interface
Supported operating systems:
- Windows 2000, Windows XP, Windows XP 64 Bit
- Windows Vista, Windows Vista 64 Bit, Windows 7, Windows 7 64 Bit,
Windows 8, Windows 64 Bit

1.5.2. Installing Software

Installation is only possible with administrator rights on the computer.
Insert PCset graphic CD into the drive.
f
If the installation programme does not start up automatically, start the file "setup.exe".
f
Observe the installation programme instructions.
f
GB
55