Context Menu Numberer Object - Reiner jetStamp graphic 970 Mode D'emploi

jetStamp graphic 970

2.6.2. Context menu numberer object

If a numberer object is inserted (see "Objects", page 60), the configuration corresponds to
the presettings (see "Presettings", page 67).
The context menu can be used to individually set each numberer object deviating from this.
To open the context menu, right-click the desired numberer object.
f
The context menu opens.
Numbering The number of the selected numberer object (1-5) is
machine displayed.
Link to number Each numberer (1-5) is first linked to a separate number circle (1-5).
circle
If several numberer objects are placed, the numberer selected can be
linked to the number circle of another numberer. The dedicated number
circle is rendered inactive by this.
The link is used to synchronise the counter reading of different
numberers.
Each printing system of a linked numberer updates the counter reading
of the shared number circle.
Numbering Opens the configuration window for numberer
machine format (see "Presettings", page 67) for the selected numberer.
The numberer range (see "Numberer range", page 68) can also be
set deviating from each other for numberers that are linked to a shared
number circle.
Settings for the number circle can only be made here when the selected
numberer is linked to the dedicated number circle.
Delete object Deletes the object.
GB
69