Use Of Dishwasher Salt - ZANKER ZKI1530 Notice D'utilisation

°dH °TH
11 - 14 19 - 25
4 - 10 7 - 18
< 4 < 7
1) No use of salt required.
You must set the water softener manually and
electronically.
Manual adjustment
The appliance is set at the factory at position 2.
1
Electronic adjustment
The water softener is set at the factory at level 5.

Use of dishwasher salt

Caution! Only use dishwashers salt. Types of salt
that are not applicable for dishwashers cause
damage to the water softener.
1
22
Water hardness
mmol/l
1,9 - 2,5
0,7 - 1,8
< 0,7
2
Set switch to position 1
or 2.
2
Clarke manually
13 - 17 1
5 - 12 1
< 5
1)
1
1. Press and hold the start/cancel button. Turn the
programme knob clockwise until the first washing
programme on the programme knob agrees with
the on/off indicator light.
2. Release the start/cancel button when the on/off in-
dicator light and the start/cancel indicator light
start to flash.
– At the same time, the end indicator light flashes
to show the level of the water softener.
Example:
5 flashes, pause, 5 flashes, pause, etc... = level
5
3. Press the start/cancel button one time to increase
the water softener level by one step.
The end indicator light shows the new level.
4. Turn the programme knob to the off position to
save the operation.
3
Fill the salt container with
1 litre of water (only the
first operation).
Water hardness setting
electronically
3
2
1)
1
4