Options; Before First Use - ZANKER ZKVS 1530 Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Information for test institutes
For all the necessary information for test performance. send an email to:
info.test@dishwasher-production.com
Write down the product number (PNC) that is on the rating plate.

Options

Acoustic signals
The acoustic signals operate in these conditions:
• When the programme is completed.
• A malfunction occurs to the appliance.
Factory setting: on.
You can deactivate the acoustic signals.
Deactivating the acoustic signals
1. Press the on/off button to activate the appliance.
2. Make sure that the appliance is in setting mode.
Refer to 'SETTING AND STARTING A PRO-
GRAMME'.
3. Press and hold the programme button until the pro-
gramme indicator (A) flashes and the programme
indicator (B) comes on.
4. Press immediately the programme button.
• The programme indicator (A) comes on with a
fixed light.
• The programme indicator (B) starts to flash.
5. Wait until the programme indicator (A) goes off and
the end indicator comes on (the programme indica-
tor (B) continues to flash).

Before first use

1. Make sure that the set level of the water softener
agrees with the water hardness in your area. If not,
adjust the water softener. Contact your local water
authority to know the water hardness in your area.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
16
• The acoustic signals are on.
6. Press the programme button. The end indicator
goes off.
• The acoustic signals are off.
7. Deactivate the appliance to confirm the setting.
Activating the acoustic signals
1. Refer to 'Deactivating the acoustic signals', step (1)
through (4).
2. Wait until the programme indicator (A) goes off.
The end indicator is off and programme indicator
(B) continues to flash.
• The acoustic signals are off.
3. Press the programme button. The end indicator
comes on.
• The acoustic signals are on.
4. Deactivate the appliance to confirm the setting.
4. Open the water tap.
5. Processing residues can stay in the appliance.
Start a programme to remove them. Do not use de-
tergent and do not load the baskets.

Publicité

Table des Matières
loading

Table des Matières