Daily Use - ZANKER ZKVS 1530 Notice D'utilisation

1
3
Put 1 litre of water in the
salt container (only for
the first time).
5
Filling the rinse aid dispenser
Caution! Only use rinse aid for dishwashers.
Other products can cause damage to the
appliance.
The rinse aid, during the last rinsing phase, helps
to dry the dishes without streaks and stains.

Daily use

1. Open the water tap.
2. Press the on/off button to activate the appliance.
Make sure that the appliance is in setting mode.
Refer to 'SETTING AND STARTING A PRO-
GRAMME'.
• If the salt indicator is on, fill the salt container.
18
2
4
6
1
max
A
-
+ -
3
A
+ - -
Fill the rinse aid dispens-
er when the lens (A) is
clear.
3. Make sure that there is rinse aid in the rinse aid
dispenser.
4. Load the baskets.
5. Add the detergent.
6. Set and start the correct programme for the type of
load and the degree of soil.
2
4
A
To adjust the released
quantity of rinse aid, turn
the selector between po-
sition 1 (lowest quantity)
and position 4 (highest
quantity).