Daily Use - ZANKER KDI11002XK Notice D'utilisation

1
3
Put 1 litre of water in the salt container (only for the
first time).
Filling the rinse aid dispenser
1

Daily use

1. Open the water tap.
2. Turn the programme knob until the programme
marker is aligned with the programme you want to
set. Make sure that the appliance is in setting
mode, refer to "Setting and starting a programme".
Set the correct programme for the type of load
and the degree of soil.
• If the salt indicator is on, fill the salt container.
3. Load the baskets.
4. Add the detergent.
5. Start the programme.
18
2
4
2
1
2
3
Fill the rinse aid dispenser when the lens (A) is
clear.
To adjust the released quantity of rinse aid, turn the
selector between position 1 (lowest quantity) and posi-
tion 4 (highest quantity).
1
A
2
4