Explanation Of Displays And Buttons - Becker Centronic UnitControl UC52 Notice De Montage Et D'utilisation

Explanation of displays and buttons

Manual/Automatic
slide switch
Indicator lamp
Cover flap
Buttons under the cover flap
Coding switch (rear of the device)
1. DIP switch (only with drive controller)
Upper position →
Alarm signal function off.
Lower position →
Alarm signal function on.
2. DIP switch
Upper position →
Group control unit
Lower position →
Drive controller
3. DIP switch
Upper position →
Blind mode
Lower position →
Roller shutter/awning mode
UP button
RETRACT button
STOP button
DOWN button
EXTEND button
RESET button
Programming button
Ventilation/tilt position
Programming button
Intermediate position
19 - en