La Pavoni BARETTO STEEL EV – BRTE Manuel D'utilisation page 28

No froth forms on the coffee
The coffee is too cold
The coffee is too hot
The machine does not
dispense steam
1. The coffee blend is not
suitable for this type of
machine
2. The grinding is unsuitable
3. There is not enough
coffee
1. The machine had not
reached the correct
temperature
2. The filter holder had not
been pre-heated
3. The cups have not been
preheated
4. The thermostat is not
working within the
required range
1. The thermostat is not
working within the
required range
1. The circuit has not been
filled
2. The hole at the end of the
steam nozzle is clogged
3. No water in the tank
4. The turbo steam nozzle
has not been inserted
properly
28
1. Replace the coffee.
2. Adjust the coffee grind
3. Increase the amount
of coffee and compact it
properly
1. Follow the instructions in
section 4.1-4.2
2. The filter holder should
be heated at the same time
as the water, see section 4.1
3. Heat the cups properly
on the cup warmer (2)
4. Contact the SERVICE
CENTRE
1. Contact the SERVICE
CENTRE
1. See section 4.3 –
dispensing steam
2. Clean the hole with a
needle
3. See section 4.1
4. Insert the turbo steam
nozzle properly