IWC Schaffhausen Spitfire UTC Mode D'emploi page 29

Taking the bracelet apart and removing
individual links
from the bracelet (3). The metal bracelet is now separated,
and you can adjust the length of the bracelet by removing
or adding individual links.
Open the push-button release safety
clasp by pressing the button on the side.
Lay the bracelet with its top surface on
a firm base. Using the special tools pro-
vided, you can now push down the
securing pin (1) at the desired point of
separation and, at the same time, dis-
place the unmarked pivot pin laterally by
about 3 mm (2) with the second special
tool. Now pull the protruding pivot pin
26 | 27