IMG STAGELINE DMX-3216 Mode D'emploi page 17

The LED next to the button will start to flash
when the programming mode has been acti-
vated.
11 LC display
12 Button INSERT (with status LED) to subse-
quently insert or delete program steps
13 Buttons and
ing manual replay and while a program is being
edited; additional functions are available when
the buttons are pressed together with other but-
tons:
+ MODE (20) – to save programs on a USB
+ MODE (20) – to load programs from a USB
+ MIDI IN (14) – MIDI control on / off
When setting up the channels for movement
control, use the buttons to select the movement
direction (PAN/TILT) to be assigned.
14 Button MIDI IN
To activate and deactivate MIDI control, press
the button together with the button
LED next to the button will light up when the
controller can be controlled by means of MIDI
signals.
15 Button TAP
When a program (CHASE) is being replayed in
the mode AUTO, the button TAP can be used to
define the replay speed. Press the button TAP
twice.
To adjust the MIDI channel, keep the button
pressed for 3 s; the LED above the button will
start to flash. To complete the adjustment, keep
the button pressed for 3 s again.
16 Button BLACK OUT
Press the button briefly to temporarily set the
value for all DMX addresses to zero. The LED
will light up. Press the button again to provide
the addresses with their previous values; the
LED will extinguish.
If the button is pressed for 3 s, the output of the
DMX signal will be interrupted; the LED above
the button will start to flash. Press the button
briefly to deactivate the interruption.
17 Depending on the current operation mode,
the number buttons 1 – 16 can be used to select
the light effect units (FIXTURE), the programs
(CHASE) or a movement pattern (MOVEMENT).
18 Button FINE to change the precision of the jog
wheels PAN (19) and TILT (22) for movement
control: When the LED next to button lights up,
to select a program step dur-
storage device
(keep pressed for 3 s)
storage device (keep pressed
for 3 s)
(13). The
fine adjustments of the movement in steps of 1
can be made.
When combined with the button MODE (20), the
button FINE can be used to assign or reverse
the movement channels,
19 Jog wheel PAN to control the pan movement
When the movement channels are being as-
signed, the LED above the jog wheel will light up
if PAN has been selected.
20 Button MODE to copy the adjustments of a light
effect unit for another light effect unit; the button
provides additional functions when combined
with other buttons
21 Button DEL; depending on the operation mode,
to delete scenes, programs or program steps.
During setup of the movement channels: in
combination with the button MODE (20), to
delete the assignment or the reversal.
22 Jog wheel TILT to control the tilt movement
When the movement channels are being as-
signed, the LED above the jog wheel will light up
if TILT has been selected.
23 Button RELEASE / CLEAR; to set the values for
all DMX addresses to zero and, when scenes,
programs or movement patterns are being
called up, to return the control of manually
changed channels to the scene, program or
movement pattern
24 Control WAIT TIME / M-RANGE to adjust the
step duration to be used when programs are
being called up, and to adjust the excursion of
the movement when movement patterns are
being called up
When adjusting the MIDI channel, to select the
channel desired [
25 Control FADE TIME / M-FADE to adjust the
crossfade time to be used while programs are
being called up, and to adjust the speed of the
movement while movement patterns are being
called up
26 DMX control signal output (3 poles, XLR) for
connection to the DMX input of a DMX light
effect unit;
Pin 1 = ground, 2 = DMX-, 3 = DMX+
27 USB port for connection of a USB storage
device to save user-defined programs (CHASE)
28 RCA jack AUDIO for connection to the output of
an audio source for the music control of pro-
grams
When the jack is connected, the internal micro-
phone of the controller will be switched off.
status LEDs (9).
button TAP (15)].
GB
17