Fixing With Screws - ADEUNIS ARF8230CA Guide Utilisateur

LoRaWAN 863-870 PULSE - Guide utilisateur / User guide version V3.0.0
To optimize fastening onto a tube or mast, we
recommend you remove the Rail-DIN locking/un-
locking lever.
To remove it, pull the lever down until the lock-
ing pins are opposite a freed-up part and then
remove the lever
6.2.2

Fixing with screws

The product is delivered with 2 CBLZ 2.2 x 19 mm screws and 2 SX4 wall plugs. Use these products or
equivalent products in order to fasten your product onto a flat support.
Two positions may be selected: Laid flat or on its edge.
• Placing it on its edge enables the product to be placed at a distance from its support and helps
achieve better propagation of the radio waves.
• If you opt for laying it flat, make sure you remove the Rail-DIN locking/unlocking lever, as ex-
plained above
50
Fastening laid flat
Location of the
screws for fastening
it laid flat
50
Fastening on its edge
Pins
Freed up part
50
Location of the
screws for fastening
it on its edge
of 103
Page 97
FR
EN