Application Operation; Periodic Transmission - ADEUNIS ARF8230CA Guide Utilisateur

LoRaWAN 863-870 PULSE - Guide utilisateur / User guide version V3.0.0

2.2. Application operation

2.2.1

Periodic transmission

The product allows the measurement and the periodic transmission of the values of the sensors accord-
ing to the following diagram:
FR
EN
No
reached
Number of
savings be-
fore send-
ing =1?
Send frame 0x46
Eg:
Register Value encoding
S301 Decimal
S321 Decimal
S320 Hexadecimal
S322 Hexadecimal
N.B: for a periodical transmission without historisation of the data, S301 must be egal to 1.
Product in
standby
Period
?
Yes
No
See paragraph about periodical
Yes
transmission with historic
Value
1
43200
0x39
0x57
Detected
No
and validat-
ed pulse
?
Yes
Counting
of the impulse
Result
Number of historisation (savings) to be done before
sending
Period of historisation/saving of the data (43200x 2
seconds = 24h).
Channel A :
• Activated
• Meter other than gas
• Tamper input activated
Channel B :
• Activated
• Gas meter
• Tamper input disabled
Anti-rebound :
• Channel A = 500ms
• Channel B = 100ms
The settings associated with this
mode of operation are:
• Transmission frequency (register
S301)
• Historisation period of the data
(register S321)
• Enabling and Configuring inputs
(register S320)
• Anti-bounce timer period (regis-
ters S322)
A complete list of the registers can
be found in paragraph 3.4.
Page 66 of 103