Installation And Use; Correct Positioning Of The Product; Types Of Fastenings; Tube Or Mast Fastenings - ADEUNIS ARF8230CA Guide Utilisateur

LoRaWAN 863-870 PULSE - Guide utilisateur / User guide version V3.0.0
6.

INSTALLATION AND USE

6.1. Correct positioning of the product

There are two key rules for optimizing radio ranges.
• The first one consists of positioning your product as high as possible.
• The second one consists of limiting the number of obstacles in order to avoid excessive attenuation
of the radio wave.
FR
Position: To the extent possible, install the transmitter at a minimum height of 1.50 m and do not
attach it to the wall.
Obstacles: Ideally, the product must be 20 cm away from any obstacle and, if possible, near an
opening (the closer the obstacle is, the more the emitted power will be absorbed). All the materials
encountered by a radio wave will attenuate it. Bear in mind that metal (metal cabinets, beams, etc.)
EN
and concrete (reinforced concrete, partitions, walls, etc.) are the most critical materials for the propa-
gation of radio waves.

6.2. Types of fastenings

The product offers 3 fastening methods that enable numerous ways of positioning it depending on the
environment where it has to be deployed.
6.2.1 Tube or mast
fastenings
As explained in section 4.1,
the best radio performance is
achieved by positioning the
product as high as possible.
The fastening collar fastenings
enable the product to be fas-
tened on a mast or tube under
completely safe conditions
20 cm
Optimised positioning
Low radio range
Holes for
fastening
collars
of 103
Page 96