Device Configuration; Iot Configurator; Advanced Mode; Connecting The Device To A Computer - ADEUNIS ARF8230CA Guide Utilisateur

LoRaWAN 863-870 PULSE - Guide utilisateur / User guide version V3.0.0
3.

DEVICE CONFIGURATION

The product can be configured using the USB interface and in two modes: or using the IoT Configurator
(a user friendly application, recommended) or using the AT command.
WARNING : the connection of the USB cable is power consuming and has an highly impact on the
device autonomy.

3.1. Iot Configurator

FR
EN
WARNING: the USB connection does not supply power to the product, it induces a consumption of the
product as long as the one is connected. It is therefore important disconnect the product after use.

3.2. Advanced mode

3.2.1

Connecting the device to a computer

Connect the product to the USB input of a computer. The product has a micro USB connector. During
connection, the device must be recognized by the computer as a Virtual Com Port (VCP) device.
Using Windows: Verification that the device has been recognized to be functioning properly can be
obtained by consulting the device manager. You should see the USB series device with a corresponding
COM port number appear during connection.
If you are not able to see a device of this type, you must install the USB driver for this device, available
to download from our website:
https://www.adeunis.com/en/downloads/
Select:
• Driver USB-STM32_x64, if your computer is a 64 bits system
• Driver USB-STM32, if your computer is a32 bits system
The IoT Configurator is a adeunis® application developed to facili-
tate the device configuration using a user-friendly interface. The IoT
Configurator can be used on a smartphone or a tablet using Android
or on a computer using Windows.
Compatible Windows 10 only and Android 5.0.0 minimum
Connect the micro-USB interface of the product to the computer or
the smartphone. The application recognized automatically the prod-
uct, download the configuration parameters and allows to configure
quicly and instinctively thanks to forms (drop down menu, check box,
text box..). The application allows to export an applicative configura-
tion to duplicate it on other products in few clicks. The IoT Configura-
tor is always updated with new features so don't forget to update the
application.
For Smartphone or tablet:
Free application available on Google Play
https://play.google.com/store/apps/details?id=com.adeunis.IoTCon-
figuratorApp
For computer: directly available on Adeunis website
https://www.adeunis.com/en/downloads/
Page 74 of 103