Table des Matières
Publicité
sigfox REFERENCE TRANSMITTER - Guide utilisateur / User guide version V1.0.0
To optimise fastening onto a tube or mast, we recom-
mend you remove the Rail-DIN locking/unlocking lever.
To remove it, pull the lever down until the locking pins
are opposite a freed-up part and then remove the
lever
FR
EN
4.2.2
Fixing with screws
The product is delivered with 2 CBLZ 2.2 x 19 mm screws and 2 SX4 wall plugs. Use these products or equivalent
products in order to fasten your product onto a flat support.
Two positions may be selected: Laid flat or on its edge.
•
Placing it on its edge enables the product to be placed at a distance from its support and helps achieve better
propagation of the radio waves.
•
If you opt for laying it flat, make sure you remove the Rail-DIN locking/unlocking lever, as explained above
Fastening laid flat
Location of the screws for
fastening it laid flat
Location of the screws for
fastening it on its edge
Fastening on its edge
Pins
Freed up part
Page
Page
18
18
of 30
of 30
Publicité
Table des Matières
