Periodic Transmission With History - ADEUNIS PULSE IP68 V4 Guide Utilisateur

LoRaWAN 863-870 PULSE IP68 - Guide utilisateur / User guide V4.0.0
2.4.2

Periodic transmission with history

The product allows the accumulation of several successive meter values before the periodic transmis-
sion of the set of values according to the following scheme:
No
No
The parameters associated with this mode of operation are:
• Enabling and Configuring inputs (register 320)
• Historisation period (register S321)
• Sending frequency (S301)
• Anti-bounce timer period (registers S322)
Eg:
Register Value encoding
S320 Hexadecimal
S301 Decimal
S321 Decimal
S322 Hexadecimal
Product in
standby
Historical
period
reached
?
Yes
Number
of record-
ed values
reached?
Yes
Sending according to channel activation:
Send frame
•
0x5A and/or 0x5B
•
Detected and
validated
pulse
?
Yes
Counting
of the impulse
5A frame for channel A
5B frame for channel B
Value Result
0x39 Channel A :
• Activated
• Meter other than gas
• Tamper input activated
Channel B :
• Activated
• Gas meter
• Tamper input disabled
4 Sending every 4 historisations (saving)
300 Historisation of the data every 10 minutes
(300x2 seconds=600 seconds).
0x57 Anti-rebound :
• Channel A = 500ms
• Channel B = 100ms
No
Page
FR
EN
47 of 58