Sensor Compatibility; Environmental Conditions And Ingress Protection - ADEUNIS PULSE IP68 V4 Guide Utilisateur

LoRaWAN 863-870 PULSE IP68 - Guide utilisateur / User guide V4.0.0
1.4.3

Sensor compatibility

Examples of sensors tested by adeunis® (non-exhaustive list):
Type
Water
FR
Gas
Electricity
Thermal
EN
1.4.4

Environmental conditions and ingress protection

The casing of the LoRaWAN 863-870 PULSE IP68 has been tested to ensure a certain level of dust and water pro-
tection.
• For dust: level 6 guarantees complete sealing against dust.
• For water: level 8 guarantees at least a complete waterproof casing for more than 1 hour in one meter deep.
The tests carried out by Adeunis for the immersion were under the following conditions: immersion for 10 hours at
a depth of 1 meter in water at room temperature (around 20 ° C) followed by an immersion for one hour in water
at 60 °C.
We can therefore guarantee the waterproofness of our IP68 case for immersions less than or equal to these times.
Any use of our sensor outside the criteria mentioned above cannot be guaranteed by Adeunis.
Important: the degree of protection IP68 does not, in any way, guarantee protection against condensation linked
to ambient humidity and temperature variations. Large variations in temperature and / or prolonged high relative
humidity can lead to an early end of product life.
Depending on the mission profile of your product, we advise you to contact us.
Name
Itron Flodis
Wehrle TRK-HYX / ETK-EAX
Sappel-Diehl Aquarius/Altair
Elster BK
Socomec Countis E00
Itron CF Echo II
Type of sensor
Cyble Sensor V2
Wehrle Modularis
IZAR Pulse 3 & 4 Fils
Elster IN-Z63
Fludia FM250E et FM250M
Page 42 of 58