Publicité
Les langues disponibles
Les langues disponibles
Pull out the crown to position 2. This will stop the movement. To set the time ac-
curately to the second, it is best to stop the movement as the seconds hand passes
60. You can now set the time by turning the crown and positioning the minute hand
exactly above the minute stroke. Moving the hands forwards past midnight causes the
calendar to switch to the following day. When advancing the calendar, you can follow
and observe the automatic switching sequence.
In order to avoid incorrect adjustment of the mechanism, you should not move the
hands back between 8 p.m. and 2 a.m. This is because the calendar is disconnected
from the movement when the hands are turned back and will not move backwards. To
start the seconds hand, push in the crown to position 0.
Important: Although the watch is water-resistant in positions 0, 1 and 2, the crown
should always be screwed in again for normal use (position X).
To set your watch correctly, proceed as follows:
– Release the crown by turning it to the left.
– Wind the movement (approximately 20 revolutions of the crown).
– Pull out the crown to position 1.
– Turn the crown to the right to advance the date display in steps. Set the display to
yesterday's date.
– Pull out the crown to position 2. This will stop the movement. To set the time accurately
to the second, it is best to stop the movement as the seconds hand passes 60.
– Turn the hands forwards until the date display changes to today's date. The hands
will now be positioned between 12 midnight and 1 a.m.
A Q U A T I M E R P E R P E T U A l C A l E n d A R d I g I T A l d A T E - M o n T h
T I M E s E T T I n g
s E T T I n g y o U R W A T C h C o R R E C T l y
— 2 6 —
Publicité
