STERWINS 40VHT2-60.1 Notice De Montage page 217

2.7 MACHINE USE AND CARE
• DO NOT FORCE THE MACHINE. USE THE CORRECT MACHINE FOR YOUR
APPLICATION. THE CORRECT MACHINE WILL DO THE JOB BETTER AND SAFER
AT THE RATE FOR WHICH IT WAS DESIGNED.
• DO NOT USE THE MACHINE IF THE SWITCH DOES NOT TURN IT ON AND
OFF. ANY MACHINE THAT CANNOT BE CONTROLLED WITH THE SWITCH IS
DANGEROUS AND MUST BE REPAIRED.
• DISCONNECT THE PLUG FROM THE POWER SOURCE AND/OR
THE BATTERY PACK FROM THE MACHINE BEFORE MAKING ANY
ADJUSTMENTS, CHANGING ACCESSORIES, OR STORING MACHINES.
SUCH PREVENTIVE SAFETY MEASURES REDUCE THE RISK OF STARTING THE
MACHINE ACCIDENTALLY.
• STORE IDLE MACHINES OUT OF THE REACH OF CHILDREN AND DO
NOT ALLOW PERSONS UNFAMILIAR WITH THE MACHINE OR THESE
INSTRUCTIONS TO OPERATE THE MACHINE. MACHINES ARE DANGEROUS IN
THE HANDS OF UNTRAINED USERS.
2.8 BATTERY TOOL USE AND CARE
• RECHARGE ONLY WITH THE CHARGER SPECIFIED BY THE
MANUFACTURER. A CHARGER THAT IS SUITABLE FOR ONE TYPE OF BATTERY
PACK MAY CREATE A RISK OF FIRE WHEN USED WITH ANOTHER BATTERY PACK.
• USE MACHINES ONLY WITH SPECIFICALLY DESIGNATED BATTERY
PACKS. USE OF ANY OTHER BATTERY PACKS MAY CREATE A RISK OF INJURY
AND FIRE.
• WHEN BATTERY PACK IS NOT IN USE, KEEP IT AWAY FROM OTHER
METAL OBJECTS, LIKE PAPER CLIPS, COINS, KEYS, NAILS, SCREWS
OR OTHER SMALL METAL OBJECTS, THAT CAN MAKE A CONNECTION
FROM ONE TERMINAL TO ANOTHER. SHORTING THE BATTERY TERMINALS
TOGETHER MAY CAUSE BURNS OR A FIRE.
• UNDER ABUSIVE CONDITIONS, LIQUID MAY BE EJECTED FROM THE
BATTERY; AVOID CONTACT. IF CONTACT ACCIDENTALLY OCCURS, FLUSH
2.9 SERVICE
• HAVE YOUR MACHINE SERVICED BY A QUALIFIED REPAIR PERSON
USING ONLY IDENTICAL REPLACEMENT PARTS. THIS WILL ENSURE THAT
THE SAFETY OF THE MACHINE IS MAINTAINED.
• MAINTAIN MACHINES. CHECK FOR MISALIGNMENT OR BINDING OF
MOVING PARTS, BREAKAGEOF PARTS AND ANY OTHER CONDITION
THAT MAY AFFECT THE MACHINES OPERATION. IF DAMAGED, HAVE
THE MACHINE REPAIRED BEFORE USE. MANY ACCIDENTS ARE CAUSED BY
POORLY MAINTAINED POWERTOOLS.
• KEEP CUTTING TOOLS SHARP AND CLEAN. PROPERLY MAINTAINED
CUTTING TOOLS WITH SHARP CUTTING EDGES ARE LESS LIKELY TO BIND AND
ARE EASIER TO CONTROL.
• USE THE MACHINE, ACCESSORIES AND TOOL BITS ETC. IN ACCORDANCE
WITH THESE INSTRUCTIONS, TAKING INTO ACCOUNT THE WORKING
CONDITIONS AND THE WORK TO BE PERFORMED. USE OF THE MACHINE
FOR OPERATIONS DIFFERENT FROM THOSE INTENDED COULD RESULT IN A
HAZARDOUS SITUATION.
• KEEP HANDLES AND GRASPING SURFACES DRY, CLEAN AND FREE FROM
OIL AND GREASE. SLIPPERY HANDLES AND GRASPING SURFACES DO NOT
ALLOW FOR SAFE HANDLING AND CONTROL OF THE TOOL IN UNEXPECTED
SITUATIONS.
WITH WATER. IF LIQUID CONTACTS EYES, ADDITIONALLY SEEK MEDICAL
HELP. LIQUID EJECTED FROM THE BATTERY MAY CAUSE IRRITATION OR BURNS.
• DO NOT USE A BATTERY PACK OR TOOL THAT IS DAMAGED OR MODIFIED.
DAMAGED OR MODIFIED BATTERIES MAY EXHIBIT UNPREDICTABLE
BEHAVIOUR RESULTING IN FIRE, EXPLOSION OR RISK OF INJURY.
• DO NOT EXPOSE A BATTERY PACK OR TOOL TO FIRE OR EXCESSIVE
TEMPERATURE. EXPOSURE TO FIRE OR TEMPERATURE ABOVE 130 °C MAY
CAUSE EXPLOSION.
• FOLLOW ALL CHARGING INSTRUCTIONS AND DO NOT CHARGE THE
BATTERY PACK OR TOOL OUTSIDE THE TEMPERATURE RANGE SPECIFIED
IN THE INSTRUCTIONS. CHARGING IMPROPERLY OR AT TEMPERATURES
OUTSIDE THE SPECIFIED RANGE MAY DAMAGE THE BATTERY AND INCREASE
THE RISK OFFIRE.
• NEVER SERVICE DAMAGED BATTERY PACKS. SERVICE OF BATTERY PACKS
SHOULD ONLY BE PERFORMED BY THE MANUFACTURER OR AUTHORIZED
SERVICE PROVIDERS.
217
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN