Télécharger Imprimer la page

STERWINS 40VHT2-60.1 Notice De Montage page 223

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
8. Lubricate the internal surfaces of the blade if the cutting device overheats during operation.
NOTE : WHILE TRIMMING, THE CUTTING DEVICE MAY BE BLOCKED.
SO THE PRODUCT WILL TURN OFF AUTOMATICALLY DUE TO OVER
CURRENT. THEREFORE RELEASE THE ON/OFF SWITCH AND THEN
START AGAIN TO GO ON WITH TRIMMING.
9. Do not force the hedge trimmer through heavy shrubbery. If the blades become jammed,
immediately release the on/off switch and remove the battery pack.
NOTE : NEVER UNINSTALL THE BATTERY PACK WHILE THE BLADE
IS STILL IN MOTION OR WHILE THE TRIGGER IS PRESSED.
10. Always be careful of flying debris during operation. Wear gloves when trimming thorny or
prickly foliage.
After use : Illustration 5.4
Clean the machine (refer to chapter maintenance) and attach the blade cover 8.
Removing and charging the battery : Illustration 6.1 and battery instruction manual
1. Press the unlock button 9 and slide the battery out of the product.
2. Place the battery pack into the charger by sliding it into a locked position until it clicks.
3. When the green light is flashing, the battery is charging. If the green light is no longer flashing,
the battery is fully charged.
WARNING ! DO NOT INSERT OR REMOVE THE BATTERY WHILE THE
TRIGGER IS PRESSED OR WHILE THE BLADE IS IN MOTION.
5. TRANSPORTATION
Transporting the machine or battery may require that you meet certain requirements specific
to your country. Please make sure to respect them by contacting the authorities of your country,
in order to respect them all. Ensure temperature during transportation will never be out of
temperature range given on chapter storage.
5.1 TRANSPORT THE MACHINE
Illustration 5.1
Switch the product off and remove the battery pack. Let the machine cool for 2 hours outside
before transport it. Always carry the product by its handle. Protect the product from any heavy
impact or strong vibrations which may occur during transportation in vehicles. Secure the
product to prevent it from slipping or falling over. Do not expose the product to sunlight.
5.2 TRANSPORT THE LITHIUM BATTERIES
Please refer to the battery instruction manual for further details.
223
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN

Publicité

loading