Additional Information; Resetting The Unit To Factory Set Defaults; Cleaning - Pioneer PDP-505HD Mode D'emploi

A I
DDITIONAL NFORMATION
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Resetting the unit to factory set
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
defaults
When the unit is in the operation mode, press
RETURN on the control panel on the main unit.
STANDBY/ON
INPUT
MENU
ADJUST
SET
S.MODE
RETURN
Initial mode
Input selector : Set to INPUT1
PICTURE
MODE : STD
SCREEN
Parameters : Set to 0
AUTO SCREEN : OFF
MODE : NATURAL WIDE (VIDEO)
ORIGINAL (PC)*
V.POSITION : Set to 0
SET UP
POWER SAVE : OFF
SIGNAL/FORMAT: – / COMPONENT2
PC / RGB
PC / RGB
G ON SYNC: OFF
OFF
STILL : OFF
* When the unit receives a signal which is not compatible with
the ORIGINAL screen size, it selects another compatible
screen size in order of 4:3 NORMAL and FULL.
Notes
÷ The PICTURE mode "USER" settings are preserved.
÷ INPUT LABEL settings are preserved.
÷ HIGH CONTRAST settings are preserved.
RETURN
(INPUT2)
(INPUT3)
(INPUT4)
(INPUT3)
(INPUT4)

Cleaning

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Regular cleaning will extend the life and performance of
this unit. The recommended way to clean the display and
related parts is described below.
Before cleaning, be sure to unplug the power cord from
the power outlet.
Cleaning the display panel body and remote
control
Do not under any circumstances use solvents such as
benzine or thinner for cleaner. Use of such liquids may
cause deterioration or peeling of paint from the display or
remote control unit.
Wipe the display and remote control gently with a soft
cloth. In the case of excessive dirt buildup, dampen a soft
cloth with a diluted neutral cleaning detergent and after
wringing the cloth thoroughly, wipe the component and
then dry it with a dry soft cloth.
Cleaning the screen
After dusting, wipe the screen gently using the supplied
cleaning cloth or a soft cloth. Do not use tissue or a rough
cloth. As the surface of the screen is easily scratched, do
not rub it or hit it with a hard object.
Cleaning the vents
As a general rule, use a vacuum cleaner about once a
month to clean the vents on the rear panel of the display
of dust buildup (set the vacuum cleaner to its weakest
setting when doing this).
Using the unit without cleaning it of dust will cause the
internal temperature to increase, resulting in possible
breakdown or fire.
Vents
Vents
Vents
Vents
49
<ARE1349> En
Vents