Part Names And Functions; Main Unit - Pioneer PDP-505HD Mode D'emploi

P N
ART AMES AND
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Main unit

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Main unit
1
2
Main unit
1
Main power switch
Use to switch the main power of the unit on and off.
2
STANDBY/ON indicator
This indicator is red during standby mode, and turns
to green when the unit is in the operation mode
(page 20).
3
Remote control sensor
Point the remote control toward the remote sensor to
operate the unit (page 50).
Operation panel on the main unit
4
STANDBY/ON button
Press to put the display in operation or standby mode
(page 20).
5
INPUT button
Press to select input (page 20).
6
<ARE1349> En
F
UNCTIONS
Operation panel on the main unit
3
STANDBY/ON
4
INPUT
5
MENU
6
ADJUST
7
SET
8
S.MODE
9
RETURN
0
Note
When optional speakers have been connected,
the operation panel on the main unit will not be
operable.
6
MENU button
Press to open and close the on-screen menu (pages
17 to 38).
7
ADJUST (5/∞/2/3) buttons
Use to navigate menu screens and to adjust various
settings on the unit.
Usage of cursor buttons within operations is clearly
indicated in the on-screen display (pages 17 to 38).
8
SET button
Press to adjust or enter various settings on the unit
(pages 17 to 38).
9
S.MODE button
Press to manually select the screen size (page 22).
0
RETURN button
Press to reset the unit to factory set defaults
(page 49).