Wiring; Explanation Of Functions - Becker Centronic VarioControl VC470-II Notice De Montage Et D'utilisation

Caution
• Risk of injury due to electric shock.
• Connection may only be performed by a qualified electri-
cian!
•
If more than one drive is going to be operated by the radio
receiver, the drives must be decoupled by relay controls.
There is no need for decoupling in the case of Becker
drives with electronic limit switching.
•
Always take into account the device switching current.
Mains 230 V / 50 Hz
1 = N (blue)
= protective conductor (green-yellow)
2 = L1 (black)
Awning operation/Venetian blind operation
You can switch between awning operation and venetian blind operation.
Awning operation
By pressing a travel button, the awning moves to the set limit position in main-
tained operation mode.
Venetian blind operation (factory setting)
For venetian blind operation, you can operate the receiver in touch mode. If
you press the travel button for longer than 1 second, the venetian blind runs in
maintained operation mode.
Direction switch
The direction switch lets you change the direction of the tubular drive from
left-handed to right-handed rotation and vice versa. The factory default setting
has the switch turned as far to the right as possible.
22 - en

Wiring

Explanation of functions

Tubular drive
1 = N (blue)
2 = black
3 = brown
Fastening clip x4
= protective conductor
(green-yellow)