Wiring - Becker Centronic VarioControl VC210 Notice De Montage Et D'utilisation

Caution
• Risk of injury due to electric shock.
• Connection may only be performed by a qualified electri-
cian!
•
The device only offers back-of-hand protection, not
touch protection.
•
Do not bend, shorten or lengthen the antenna.
•
Only operate the programming button with an insulated
tool.
• The cable entries must not be exposed to any mechanical
loads, particularly tensile loads.
• Always take into account the device switching current.
Symbol description:
Tubular drive (excluding power supply)
Power supply unit Already connected to the VC310...
Heating element. Observe the switching power specified in the
"Technical data" chapter.
LED lighting system. Observe the performance figures specified in
the "Technical data" chapter.

Wiring

25 - en